wonderful-wall panel is very easy to process.All cutting,milling, slotting,side-folding and curving can be easily fulfilled by simple tools used for processing timber and metal.It can be shaped into various shapes,such as curve,reserve curve, curve comer and sharp curve,according to requirements of building design.It is incomparalbe for other decorating materials.
Normal aluminum product processing machinery and wood product processing machinery can be used for processing of wonderful-wall panel without special device.
Saw cutting
It can be easily processed with wood product processing saw and plate saw.It's recommended to use hard alloy blade
Bending Width pannel folder
If operated on the platform,bending part can be made very tidy.Platen puncher,plate folder or bending dies are applied as bending equipment.The recommended temperature for bending is over 10.
 |
 |
| Saw cutting |
Bending Width pannel folder |
Bending with 3-roller panel bender
3-roller panel bender is more preferable for bending of large intemal diameler to plate folder,beforethe bending,it shall ensure that it can be manually bent after bending.
Riventing
Countersunk rivet can realize easy joint from one direction。
Bolting
Considering from deformation limit,formul e>2D is the best calculation way of aperture D anddistance from hole center to plate end.
slotting
 It's important to make the U type slotting process with a distance fo 0.2-0.4mm from the polyethylene substrate.
The recommended slot angle is 110
(1)milling machine and trimmer
Use the modified drill as showed in the left chart.
Running speed:20000-30000rpm
Feed speed:3-5m/min
Materal:hard alloy
(2)When processing large quantity of U type slots,
it's recommended to use round saw and belt saw.And the following is an example of slotter
material:hard alloy flake
outer diameter:305mm
number of teeth:24
running speed:3000-5000rpm
|
;)
